Many people build their pavilions in their backyards or open spaces and use them to host important gatherings such as dinners and birthdays. Depending on your preference, it can be designed to be simple or complex.
Need to build GAZEBO materials
The materials required for your project are two to four building stocks, two ten joist stocks, prefabricated stairs, pillars, joist hangers, wood column anchors, roof trim panels, cement, base pipes, shingles , sand, H2O and railings.
TOOLS
The tools needed to complete this work are nails, hammers, circular saws, table saws, drill bits, drill bits, portable cement mixers, shovel, chalk, ropes, stakes, pens and paper, power cords, goggles and a pair of ladders.
Steps to build GAZEBO
Most people build round or pentagon pavilions. Although the circular shape requires more attention to detail, the steps of any shape are the same. Look for the center of your structure. Place the pile in the center of the structure and attach a rope. With the help of the rope, cross the circle and place the stakes on each foundation.
Keep in mind that the larger the structure, the more base holes you need to dig. Eight to ten inch planks typically require a base location on each side of each plank. Even if it is a separate structure, you will need to obtain a building permit from the local city government. Dig a four-inch base hole under the frost line. Place the base tube into the base hole and make sure it is 3 inches underground.
Mix some of the cement and place it in the base pipe. The cement mixture is installed into the cement mixture before it is dried. Repeat the same steps for the reference hole. Connect your posts to the base and make sure they are all at the same level.
Attach the joists to the wooden posts to see if they are the same height at each step. Place two ten joists and check again if all heights are the same. For the larger one, a more complex framework system is needed. For smaller brackets, additional support is required between the main joists. For floor coverings, keep in mind that you need to make room between the floors to prevent any H2O buildup. Place the column on all base points. If there are no mounting points above the column, place wood to better secure the roof panels and joists.
For the roof frame, use a rod. Divide the joists into the required length and connect them to the top of the column and main block. Additional hands and a pair of ladders will help you place the 3 joists on the main block and support. You can use several supports to reinforce the frame of the roof. Railings usually have different sizes and features.
You can make your own railings, but pre-built railings can help you save time. The materials required for the roof are wood, roofing paper and asphalt shingles. Make sure you get the right measurements before you start building the roof. Angles can be very challenging, especially when cutting wood and roofing paper. Fix everything with your nails.
Additional tips
Be careful when you repair the roof of a masterpiece. Ask others to protect the ladder for you so you don't have to worry about climbing.
Orignal From: How to build a pavilion
No comments:
Post a Comment