As you complete the finishing process, you need to pay attention to many details and issues.
-
Thread tail -
Missing needle -
Lost thread -
Loop in embroidery design -
Is the embroidery straight? -
Clothing stains -
Compensation -
Missing button -
Zipper does not work -
Bobbin pulled up
Thread tail: from
Keep your clothes as close as possible, but be careful not to cut off any locks.
Lost stitches: from
If you find some stitches that have been skipped and missing, you will need to fix them. The easiest way is to sew a hand stitch with a double-line matching embroidery thread and use a satin needle to fill the missing stitch.
Lost thread: from
During the embroidery process, the pierced thread sometimes passes through the embroidery. Stitch as carefully as possible, being careful not to cut any locking knots. Gently remove it with tweezers.
Thread loop: from
If you see the same thread loop as the stitching direction -Don't trim the loop! from
Scratch the back of the clothes with your fingernails. Use A drop of Fraycheck from
On the back of the stitch, the loop is scraped back. Don't let Fraycheck put on your clothes!
If the threads circulate in a different direction than the stitching direction, it is usually safe to trim. Cut the stitches as much as possible.
歪 logo or embroidery: from
If the embroidery is slightly bent, place the clothes on the trimming table. Steam embroidery area. When the embroidery is warm, place the palm flat on top of the embroidery and gently twist or turn the hand in the opposite direction to the embroidery.
Spots/stains on clothing: from
There are various spot removal methods depending on the type of material and the type of spot. Most spots can be removed with a drop of detergent and water. If this doesn't work, once the clothes are dry, you can spray the area with acetone. This application requires a professional acetone cleaner or sprayer.
Damaged clothing: from
If any clothing is damaged during embroidery or hoop, it must be removed. Don't try to wear clothes that cause any harm to it. Customers will be very angry. Get the customer's attention and let them decide what he or she wants to do. I owe the customer to clothing or change clothing, but I leave the decision to the customer.
Missing buttons and zips don't work: from
If the button is missing, the button can be replaced many times. If it's a piece of clothing that presses the entire front, sometimes there's an extra button at the bottom. If it's a brand button that can't be replaced, let the customer know about it and let him decide what to do.
This is a problem that should be discovered when the clothing is checked in. If not, please bring your attention to the customer again. If you embroider clothes and the zipper is broken, you should be responsible for it. Manufacturers usually do not change clothes after embroidering, even if the zipper does not work when received.
Bobbin pull up: from
In some logos, there are sometimes bobbin threads with a clear dark stitch. These stitches need to be colored with a fine pointed permanent marker that is exactly the same color as your thread. Do not use this marker to touch any surrounding area.
Make sure all clothes are buckled and zippered before folding and packaging. Note that the details of the completion process will make a huge difference in your presentation and show your customers that you are very interested in their business. This will definitely improve your customer service level!
Orignal From: Embroidery finishing - Embroidery finishing details will enhance your customer service level!
No comments:
Post a Comment